110mm Underground Drainage - Chambers & Lids

New product

300mm Mini Access Chamber (MAC) and 450mm Large Inspection Chamber (LIC) offer an alternative to traditional manholes and may be used in depths of up to 600mm for the MAC, 1200mm and 3000mm for the Large Inspection Chamber.

300mm Mini Access Chamber (MAC).

Innovative design for the MAC, brings unrivalled flexibility to the underground drainage market.

The MAC has flexible connections for all inlets allowing a 10° movement in any direction. This is of great assistance to the installer where the connecting pipes are not perfectly aligned with the MAC inlets. In many instances it will eliminate the need to install an extra bend and provide a saving on the cost of the installation.

In addition, the variety of inlet combinations available on the Mini Access Chamber and the choice of two chamber risers, 100mm and 200mm, provide installers with a significant advance in the ease of which they can plan and install their drainage system. The MAC base is designed to facilitate the stacking of bases on top of one another to give a space saving storage solution for the merchant stockist.

The plastic cover and frame can take loadings up to a maximum of 35kN. (Please ensure Sealing Rings are used in conjunction with each riser section as supplied).

In summary, the Mini Access Chamber design and flexibility provides a practical, innovative and cost effective solution for the provision of access in a drainage system

450mm Diameter Large Inspection Chamber (LIC).

Product innovation is again demonstrated with the introduction of a new 450mm Diameter Large Inspection Chamber.

To comply with the changes to Approved Document H of The Building Regulations 2000, significant research and development has gone into the design of this unique product. The Chamber base incorporates five 110mm flexible inlets, which allow 10° of movement in any direction.

The large inspection chamber is manufactured to BS7158.

The plastic cover and frame can take loadings up to a maximum of 35kN. (Please ensure Sealing Rings are used in conjunction with each riser section).

Wecommend that reference should be made to the appropriate Codes of Practice for Underground Drainage Systems.

European Standards BS EN752: 1997 Drain and sewer systems outside buildings and BS EN1610: 1998 Construction and testing of drains and sewers, have been introduced. These have replaced British Standards BS8301 (Code of Practice).

8 other products in the same category: