110mm Underground Drainage - Bottle Gullys & Adaptors

New product

System Features:

Gullies hold water to stop foul air escaping from the foul drainage system.  They are designed to accept waste water from kitchens, utility rooms and ground floor bathrooms or rainwater from paved areas or roofs.

It is desirable that the bottle gully be connected to a manhole, but due to the fact that it is roddable it may be positioned up to 22 metres away from one.  However, the Gully must be less than 12 metres from the drain and a set of drain rods must be able to pass right through the junction.

Gullies available

Universal Gully Trap (D500):

  • 45° Outlet.
  • To obtain ‘P’ or ‘Q’ trap, add 45° or 87.5° bend.
  • Can be used with D504, Square Hopper; D506, Rectangular Hopper and  D94 Leaf/Debris Interceptor Gully.


Low Back ‘P’ Trap (D501):

  • 90° Outlet.
  • To obtain ‘Q’ or ‘S’ trap, add 45° or 87.5° bend.
  • Can be used with D504, Square Hopper; D506, Rectangular Hopper and D94 Leaf/Debris Interceptor Gully.


Leaf/Debris Interceptor Gully (D94):

  • Available in black.
  • Removable internal basket, which intercepts leaf/debris to stop it entering the drainage system to prevent blockages.
  • Push out sections within the top plate allows for the connection of 68-110m pipes.


Bottle Gully Circular Grid (D510):

  • Screw down lid, removable.
  • Also available with a rectangular grid (D520).
  • Sealed dip tube easily removed for rodding purposes.
  • Both circular (D514) and rectangular (D524) grids are available separately.


Back Inlet Bottle Gully Circular Grid (D540):
  

  • Screw down lid, removable.
  • Also available with a rectangular grid (D530).
  • Sealed dip tube easily removed for rodding purposes.
  • Back inlet socket plug easily removed.  No need to drill.
  • Both circular (D514) and rectangular (D524) grids are available separately.

 
Risers for bottle gully traps (D505):

  • Designed for use with FloPlast Bottle Gullies, this is an ideal addition when laying block or slab paving.
  • Can be used on new installations or existing gullies, raises gully grating by up to 200mm.
  • Can be easily cut to length to suit different ground levels.
  • Easily installed by a simple push fit connection.

8 other products in the same category: